The M 300 is a compact condenser microphone in studio quality. The frequency response of the transmission factor is practically linear for a wide range of sound incidence and has a smooth treble boost rising to about 3 dB between 6 and 10 kHz. The miniature microphone is well suited for vocal and instrumental soloists. lt permits a lifelike recording also at various sound incidence, e.g. announcer in synchronous studios, speaker, blower.

The M 300 is designed for studio applications in radio, television broadcasting and films for live performance and recording of instruments, vocals and speech and sound reinforcement in the professional and semiprofessional market also under adverse acoustic conditions, e.g. in churches.

A new low-noise integrated hybrid circuit and the transformer-less circuit design guarantee an extremely wide dynamic range by a low equivalent loudness level and a high reliability in operation.
RFI susceptibility is very low.

The microphone is powered by a 3-pin XLR connector with the C 70 microphone cable. The power supply is provided by 48 V phantom powering, which is internationally standardized as P 48 in DIN 45596 and IEC 268-15. A two-channel powering is possible with the N 200 power supply.

The finish of the miniature microphone is dark bronze.

lt is recommendable at close-talking to use the wind screen W 20

 

high resolution

 
Microphone M 300 in a wooden case
L x B x H
  195 x 68 x 43 mm
dark bronze
Order-No. 211101

Windscreen, anthracite
W 20
Order-No. 202401
Popscreen, black
PO 70
Order-No. 600018
Microphone holder, dark bronze
MH 93
Order-No. 202326
Elastic suspension, dark bronze
EA 20
Order-No. 202342
Elastic suspension, dark bronze
EH 93
Order-No. 202328
Table stand, dark bronze
TS 64
Order-No. 212304
Double mount, dark bronze
TD 93
Order-No. 202332
Gooseneck, black
ME 90
Order-No. 202324
Power supply
N 200
Order-No. 202101
Connection cable
C 70
Order-No. 202212

Condenser Miniaturemicrophone
M 300
Polar pattern
Cardioid
Acoustical operating principle
Pressure gradient transducer
Frequency range
40 ... 18000 Hz
Sensitivity at 1 kHz
12 mV / Pa
Output impedance
100 
Equivalent loudness level
due to inherent noise
CCIR 468-4
26 dB
DIN EN 60651
16 dB - A
Signal-to-noise-ratio
(re. 1 Pa at 1 kHz)
CCIR-weighted
68 dB
A-weighted
78 dB
Max. SPL for THD 0,5 %
147 dB
Total dynamic range of the microphone amplifier
131 dB
Current consumption (P 48, DIN 45596, IEC 268-15)
3,3 mA
Output connector
3-pin XLR-connector
goldplated contacts
Weight
126 g
Dimensions (L x )
130 mm x 21 mm

 
cardioid



1 kHz 250 Hz 500 Hz
1 kHz 2 kHz 4 kHz
1 kHz 8 kHz 16 kHz
     
   
next side