The M 92.1 S exhibits high sensitivity and with that an excellent signal-to-noise ratio. lt has the typical warm full sound of tube microphones which is especially preferred by singers and soloists.
The M 92.1 S vacuum tube-condenser microphone is suited or difficult radio play recordings as well as supporting microphone for orchestra recordings.
The time proven pressure gradient transducer of the M 92.1 S uses two large diameter gold sputtered plastic membranes.
The vacuum tube preamplifier is equipped with pentode working as triode selected for its sonic characteristics.
The N 920.1 power supply provides the operating voltages for the vacuum tube-condenser microphone. It can be powered from a.c. mains with the primary voltage of 115 or 230 volts 50 or 60 Hz.
It is recommended to set the heater voltage of the power supply to 5,8 volts by your service work-shop for cable lengths longer than 50 meters.
The N 920.1 is equipped with the on/off- switch, the 7-pin Tuchel connector which powers the microphone and a 3-pin XLR connector for audio output and the a.c. mains connector with integrated voltage selector switch.
The complete system includes the M 92.1 S Microphone packed in a wooden case, N 920.1 power supply, C 92.1 microphone cable and an elastic suspension.
The microphone is available in satin nickel and dark bronze.

 

high resolution

 
Microphone M 92.1 S in Suitcase   L x B x H   450 x 350 x 160 mm
Power supply N 920.1
Connection cable C 92.1
Elastic suspension EA 92
satin nickel
Order-No. 211189
black matt
Order-No. 211190

M 92.1S, gold, 24 Karat

Windscreen, anthracite
W 92
Order-No. 202402
Popscreen, black
PO 70
Order-No. 600018
Microphone holder, satin nickel
Microphone holder, black matt
MH 80
MH 80
Order-No. 202320
Order-No. 202321
Connection cable
C 92.1 S
Order-No. 202206
Suitcase, aluminium
Case 1
Order-No. 702005

Tube-Condenser Microphone
M 92.1 S
Polar pattern
cardioid
Acoustical operating principle
Pressure gradient transducer
Frequency range
40 ... 18000 Hz
Sensitivity at 1 kHz
19 mV / Pa
Rated impedance
200
Equivalent loudness level
due to inherent noise
CCIR 468-4 (qps)
25 dB
DIN EN 60651
15 dB - A
Signal-to-noise ratio
(re 1 Pa at 1 kHz)
CCIR-weighted
69 dB
A-weighted
79 dB
Max. SPL for THD 0,5 %
103 dB
Total dynamic range of the microphone amplifier
106 dB
DC power supply
120 V -
Anode current
1 mA -
Heater voltage
5,8 V -
Heater current
200 mA -
Tube
EF 86
Output connector
7- pin Tuchel C 70 / A
Weight
430 g
Dimensions (L x )
197 mm x 42 mm


125/ 250 Hz 500 Hz 1 kHz 2 kHz
1 kHz 4 kHz 8 kHz 16 kHz